俄罗斯认证集团测试中心
РОССИЙСКИЙ ЦЕНТР СЕРТИФИКАЦИИ ПРОДУКЦИИ
Испытательная лаборатория "АЛБА-ТЕСТ" АНО "ЮПК "ПРОГРЕСС"
Recognition certificate:RA.RU.21ПЮ34 RA.RU.21ЩИ01 RA.RU.21НС54
24小时认证热线：
电话：18016497786
xu.ilina@Yandex.com
gost-r@163.com
新闻中心
news center
我们专业开展海关联盟trcu认证（EAC认证）,俄罗斯（GOST认证，俄罗斯防火认证，俄罗斯计量认证，俄罗斯医疗器械认证，保健品化妆品食品注册认证）乌克兰（乌克兰技术法规认证，乌克兰卫生证书，乌克兰医疗器械注册），哈萨克斯坦（GOST-K认证，计量认证，GGTN许可，豁免函，医疗器械注册），乌兹别克斯坦认证，乌兹别克斯坦医疗器械注册
CU TR 032/2013 on safety of pressure equipment - certification and declaration of conformity
cutr Declaration,TRCU Declaration, EAC certificate, CU-TR Declaration,TRCU certification,，CU TR 032/2013 on safety of pressure equipment - certification and declaration of conformity
Technical Regulation CU TR 032/2013 on safety of pressure equipment: main definitionsEurasian Economic Union
Technical Regulation CU TR 032/2013 on safety of pressure equipment adopted in the framework of the Customs Union between Russia, Belarus and Kazakhstan by the Decree No. 41 of July 02, 2013 of the Commission of the Customs Union came into force on February 01, 2014.
Scope and relevant products
CU TR 032/2013 establishes requirements for:
a) vessels intended for gases, liquefied gases dissolved under pressure, and the vapour used for working environment of group 1 and having:
maximum allowable working pressure above 0.05 MPa, more than 0,001 m3 capacity and the product of the maximum allowable working pressure on the value of the capacity of over 0.0025 MPa • m 3
maximum allowable working pressure of over 20 MPa, the capacity of more than 0.0001 m3 to 0,001 m3 inclusive.
Categories of vessels for gases used for working media of group 1 are listed in Table 1 of Appendix 1 to this technical regulation
b) vessels intended for gases, liquefied gases dissolved under pressure, and the vapour used for working environment of group 2 and having:
maximum allowable working pressure above 0.05 MPa, more than 0,001 m3 capacity and the product of the maximum allowable working pressure on the value of the capacity of over 0,005 MPa • m 3
maximum allowable operating pressure of more than 100 MPa, the capacity of more than 0.0001 m3 to 0,001 m3 inclusive.
Categories of the vessels for gases used for working media of Group 2 are shown in Table 2 of Appendix 1 to this technical regulation
c) vessels intended for liquids used in working media of group 1 and having:
maximum allowable working pressure above 0.05 MPa, more than 0,001 m3 capacity and the product of the maximum allowable working pressure on the value of the capacity of over 0.02 MPa • m 3
maximum allowable working pressure of over 50 MPa, the capacity of more than 0.0001 m3 to 0,001 m3 inclusive.
Categories of vessels for liquids and used for working media of group 1 are listed in Table 3 of Appendix 1 to this technical regulation
d) vessels intended to contain liquids, used for working media of group 2 and having:
maximum allowable operating pressure in excess of 1 MPa, the capacity of more than 0.01 m3 and the product of the maximum allowable working pressure on the value of the capacity of well over 1 MPa • m 3
maximum allowable operating pressure of more than 100 MPa, the capacity of more than 0.0001 m3 to 0.01 m3 inclusive.
Categories of the vessels for liquids and used for working media of Group 2 are shown in Table 4 of Appendix 1 to this technical regulation
e ) boilers having a capacity of 0,002 m3, intended to produce hot water having a temperature above 110 º C or vapour pressure above 0.05 MPa which, as well as direct-fired vessels with a capacity greater than 0,002 m3.
Categories of steam and hot water boilers and direct-fired vessels are shown in Table 5 of Appendix 1 to this technical regulation
f) pipelines having maximum allowable operating pressure above 0.05 MPa, nominal diameter of 25 mm, intended for gases and vapours and used in working media of group 1.
Categories of pipelines intended for gases and vapours, and used in working media of group 1 are shown in Table 6 of Appendix 1 to this technical regulation
g) pipelines having the maximum allowable working pressure above 0.05 MPa, nominal diameter greater than 32 mm and the product of the maximum allowable working pressure on the nominal diameter of more than 100 MPa • mm, intended for gases and vapours and used in working media of group
Categories of pipelines intended for gases and vapours, and used in working media of Group 2 are shown in Table 7 of Annex 1 to this technical regulation
h) pipelines having maximum allowable working pressure above 0.05 MPa, nominal diameter of 25 mm and the product of the maximum allowable working pressure on the nominal diameter of more than 200 MPa •mm, designed for liquids and used in working media of group 1.
Categories of pipelines designed for liquids and used for working media in group 1 are shown in Table 8 of Appendix 1 to this technical regulation
i) pipelines having maximum allowable operating pressure of more than 1 MPa, nominal diameter of 200 mm and the product of the maximum allowable working pressure on the nominal diameter of more than 500 MPa• mm, designed for liquids and used for working media of group 2.
Categories of pipelines designed for liquids and used for working media of Group 2 are shown in Table 9 of Annex 1 to this technical regulation
j) pressure-resistant items of equipment (assembly units) and its components
k ) valves having nominal diameter of 25 mm (for equipment of group 1 working medium), valves with nominal diameter of 32 mm ( for equipment used for gas medium of group 2), valves with nominal diameter of 200 mm ( for pipelines designed for liquid and used for working media of group 2.
l) showing and safety devices
m ) vacuum chambers ( except single-seated medical )
n) safety devices and apparatuses.
The requirements of CU TR 032/2013 shall not apply to the following equipment:
a) pipelines, field and local distribution pipelines designed for the transportation of gas, oil and other products, except equipment used in pressure regulating stations or compression stations
b) gas distribution and gas consumption networks
c) equipment specially designed for use in nuclear power equipment, working with radioactive environment
d) vessels working under pressure, created during explosion inside them in accordance with technological process or during combustion at the regime of propagating high-temperature synthesis
e) equipment specially designed for use in marine and river vessels and other floating devices and objects of underwater use
f) braking equipment of railway rolling stock, vehicles and other means of transportation
g) vessels specifically designed for use in planes and other aircraft
h) equipment for defense purposes
i) parts of machines, which are not independent vessels (cases of pumps or turbines, steam engine and hydraulic cylinders, internal combustion engines, machines and air compressors)
j ) medical single pressure chambers
k ) equipment with aerosol sprays
l) shells of high-voltage electrical equipment (switchgear, control gear, transformers, and rotating machines)
m ) cases and shells of electric energy transmission systems (power cables and communication cables), working under excessive pressure
n) equipment manufactured (produced) from non-metallic flexible (elastic) membranes
o) silencers or exhaust gas inlets
p) vessels or siphons for carbonated beverages.
Market LaunchCertificate CU TR 032 2013
Prior to launching pressure equipment onto the Customs Union market, the manufacturer / representative should:
comply with the basic health and safety requirements mentioned in the Technical Regulation CU TR 032/2013
apply procedures for conformity assessment
obtain conformity documents, as well as make sure that the latter is included in products
make sure that products bear the EAC mark
In practice, any products coming onto the Customs Union markets (sales outlets and commissioning sites) after customs clearance should include originals / certified copies of certificates of conformity.
微信号 扫一扫联系我 公众号 扫一扫 关注我
Technical Regulation CU TR 032/2013 on safety of pressure equipment adopted in the framework of the Customs Union between Russia, Belarus and Kazakhstan by the Decree No. 41 of July 02, 2013 of the Commission of the Customs Union came into force on February 01, 2014.
Scope and relevant products
CU TR 032/2013 establishes requirements for:
a) vessels intended for gases, liquefied gases dissolved under pressure, and the vapour used for working environment of group 1 and having:
maximum allowable working pressure above 0.05 MPa, more than 0,001 m3 capacity and the product of the maximum allowable working pressure on the value of the capacity of over 0.0025 MPa • m 3
maximum allowable working pressure of over 20 MPa, the capacity of more than 0.0001 m3 to 0,001 m3 inclusive.
Categories of vessels for gases used for working media of group 1 are listed in Table 1 of Appendix 1 to this technical regulation
b) vessels intended for gases, liquefied gases dissolved under pressure, and the vapour used for working environment of group 2 and having:
maximum allowable working pressure above 0.05 MPa, more than 0,001 m3 capacity and the product of the maximum allowable working pressure on the value of the capacity of over 0,005 MPa • m 3
maximum allowable operating pressure of more than 100 MPa, the capacity of more than 0.0001 m3 to 0,001 m3 inclusive.
Categories of the vessels for gases used for working media of Group 2 are shown in Table 2 of Appendix 1 to this technical regulation
c) vessels intended for liquids used in working media of group 1 and having:
maximum allowable working pressure above 0.05 MPa, more than 0,001 m3 capacity and the product of the maximum allowable working pressure on the value of the capacity of over 0.02 MPa • m 3
maximum allowable working pressure of over 50 MPa, the capacity of more than 0.0001 m3 to 0,001 m3 inclusive.
Categories of vessels for liquids and used for working media of group 1 are listed in Table 3 of Appendix 1 to this technical regulation
d) vessels intended to contain liquids, used for working media of group 2 and having:
maximum allowable operating pressure in excess of 1 MPa, the capacity of more than 0.01 m3 and the product of the maximum allowable working pressure on the value of the capacity of well over 1 MPa • m 3
maximum allowable operating pressure of more than 100 MPa, the capacity of more than 0.0001 m3 to 0.01 m3 inclusive.
Categories of the vessels for liquids and used for working media of Group 2 are shown in Table 4 of Appendix 1 to this technical regulation
e ) boilers having a capacity of 0,002 m3, intended to produce hot water having a temperature above 110 º C or vapour pressure above 0.05 MPa which, as well as direct-fired vessels with a capacity greater than 0,002 m3.
Categories of steam and hot water boilers and direct-fired vessels are shown in Table 5 of Appendix 1 to this technical regulation
f) pipelines having maximum allowable operating pressure above 0.05 MPa, nominal diameter of 25 mm, intended for gases and vapours and used in working media of group 1.
Categories of pipelines intended for gases and vapours, and used in working media of group 1 are shown in Table 6 of Appendix 1 to this technical regulation
g) pipelines having the maximum allowable working pressure above 0.05 MPa, nominal diameter greater than 32 mm and the product of the maximum allowable working pressure on the nominal diameter of more than 100 MPa • mm, intended for gases and vapours and used in working media of group
Categories of pipelines intended for gases and vapours, and used in working media of Group 2 are shown in Table 7 of Annex 1 to this technical regulation
h) pipelines having maximum allowable working pressure above 0.05 MPa, nominal diameter of 25 mm and the product of the maximum allowable working pressure on the nominal diameter of more than 200 MPa •mm, designed for liquids and used in working media of group 1.
Categories of pipelines designed for liquids and used for working media in group 1 are shown in Table 8 of Appendix 1 to this technical regulation
i) pipelines having maximum allowable operating pressure of more than 1 MPa, nominal diameter of 200 mm and the product of the maximum allowable working pressure on the nominal diameter of more than 500 MPa• mm, designed for liquids and used for working media of group 2.
Categories of pipelines designed for liquids and used for working media of Group 2 are shown in Table 9 of Annex 1 to this technical regulation
j) pressure-resistant items of equipment (assembly units) and its components
k ) valves having nominal diameter of 25 mm (for equipment of group 1 working medium), valves with nominal diameter of 32 mm ( for equipment used for gas medium of group 2), valves with nominal diameter of 200 mm ( for pipelines designed for liquid and used for working media of group 2.
l) showing and safety devices
m ) vacuum chambers ( except single-seated medical )
n) safety devices and apparatuses.
The requirements of CU TR 032/2013 shall not apply to the following equipment:
a) pipelines, field and local distribution pipelines designed for the transportation of gas, oil and other products, except equipment used in pressure regulating stations or compression stations
b) gas distribution and gas consumption networks
c) equipment specially designed for use in nuclear power equipment, working with radioactive environment
d) vessels working under pressure, created during explosion inside them in accordance with technological process or during combustion at the regime of propagating high-temperature synthesis
e) equipment specially designed for use in marine and river vessels and other floating devices and objects of underwater use
f) braking equipment of railway rolling stock, vehicles and other means of transportation
g) vessels specifically designed for use in planes and other aircraft
h) equipment for defense purposes
i) parts of machines, which are not independent vessels (cases of pumps or turbines, steam engine and hydraulic cylinders, internal combustion engines, machines and air compressors)
j ) medical single pressure chambers
k ) equipment with aerosol sprays
l) shells of high-voltage electrical equipment (switchgear, control gear, transformers, and rotating machines)
m ) cases and shells of electric energy transmission systems (power cables and communication cables), working under excessive pressure
n) equipment manufactured (produced) from non-metallic flexible (elastic) membranes
o) silencers or exhaust gas inlets
p) vessels or siphons for carbonated beverages.
Market LaunchCertificate CU TR 032 2013
Prior to launching pressure equipment onto the Customs Union market, the manufacturer / representative should:
comply with the basic health and safety requirements mentioned in the Technical Regulation CU TR 032/2013
apply procedures for conformity assessment
obtain conformity documents, as well as make sure that the latter is included in products
make sure that products bear the EAC mark
In practice, any products coming onto the Customs Union markets (sales outlets and commissioning sites) after customs clearance should include originals / certified copies of certificates of conformity.
海关联盟认证,EAC认证,CU-TR认证,GOST认证,俄罗斯认证,海关联盟cutr认证,俄罗斯计量认证,俄罗斯防火认证,乌克兰认证,乌兹别克斯坦认证,哈萨克斯坦认证,俄罗斯医疗器械认证,乌兹别克斯坦医疗器械认证,俄罗斯防爆认证,俄罗斯cu-tr认证Copyright © 2009-2011,www.cu-tr.com.cn,All rights reserved 未经同意，不得转载
俄罗斯认证测试中心"ALBA-TEST" Испытательная лаборатория "АЛБА-ТЕСТ" АНО "ЮПК "ПРОГРЕСС"
Recognition certificate:RA.RU.21ПЮ34RA.RU.21ЩИ01 RA.RU.21НС54 海关编码HS
电话：021-36411293 地址：中国上海浦东新区高科东路777号1号楼2017室 海关编码查询 沪ICP备16045803号-16
邮箱: gost@gost.org.cn cutrchina@163.com skype: gostchina 手机和微信WeChat：18016497786